Drain Jetting Jesmond

Drain jetting in Jesmond uses water at high pressure, with no chemicals, to clear a blocked line: grease, sludge, silt and soft roots come off the pipe wall rather than being forced further down the run. You get a fixed price before the hose goes down.

Where the rest of the drain work sits. The full list is on the blocked drains hub. For the wider jobs a plumber in Jesmond takes on, hot water to gas, the home page covers them all.

Call (02) 4063 1093 Request a quote

Licensed plumbers and gas fitters · NSW Lic. 359278C

Last updated September 2026

Why does jetting beat the eel on grease?

Both tools have their place, and we carry both. Jetting wins when the blockage is built up rather than packed hard:

The water scrubs the whole pipe wall. Nozzle heads fire forward and back, cleaning the lining the way a spinning cable never can.
Grease and sludge come out of the pipe instead of being pushed along. An eel punches a channel through a fat blockage; the jet strips the build-up off the walls so it doesn't rebuild in a month.
Nothing chemical goes down the drain. Just water, at a pressure we set to suit the pipe in front of us.

How does a jet run work?

A jet run follows the same four beats on every job:

01
A camera look first where the line's history is unknown, so the pressure suits what old earthenware can actually take.
02
Access at the closest inspection opening
On older places these sit deep or paved over, and that gets accounted for up front.
03
Pressure matched to the material
Gentle on clay and earthenware, full bore on PVC.
04
Footage of the finished line
So you see a clean pipe on screen rather than taking our word for it.

How is a jet run priced?

We provide up-front, honest quotes that will always match the final price, should you decide to go ahead.

The price depends on four things:

Distance to the blockage And how many inspection openings give us a way in.
What the blockage is A fat build-up flushes through faster than a root mat that needs cutting as well as washing.
The pipe itself Brittle clay runs call for a slower, gentler pass than a straight PVC line.
The hour Night and weekend jet runs are charged at a higher rate, quoted on the phone before booking.

Old pipes, street trees, flooding ground

The housing sets the job

Much of the housing here dates from the decades between the 1940s and the 1980s, brick-veneer, fibro and weatherboard, and many of those places still drain through their original earthenware. Those runs crack at the collars as the years pass, and a cracked collar is an open door.

The gardens finish the job

Established trees and mature gardens sit over those old lines, so root mats in these lines come as no surprise, and the jet is what cleans the wall after the roots are cut out.

Then there are the storms

Jesmond drains to Dark Creek, and heavy rain regularly overruns the street pit-and-pipe network. Silt and leaf litter end up in property lines, and flushing those out is covered under stormwater drains once the weather eases.

What Customers Say

We talked through the options of our blocked kitchen sink drain (not just an s bend problem) and came to the perfect long term solution at a reasonable price.

Debbie

When We're Not the Right Call

Jetting cleans a pipe; it doesn't repair one. Where the footage shows a line has collapsed or bellied, the honest next step is pipe relining or excavation, and paying for a jet run first would just spend money on the wrong thing. When the street main itself is overflowing in a Dark Creek storm, that is Hunter Water's pipe, so ring them about it.

Questions Before the Hose Goes Down

Is jetting safe for old clay pipes in a Jesmond house?

The pressure gets matched to the pipe before the hose goes near it. Brittle earthenware runs get a gentler pass than PVC, and a camera look first shows what the line can take. Cracked joints get flagged for repair, not blasted.

Does jetting get rid of tree roots for good?

It cuts soft roots out and scrubs the wall clean, but roots inside a cracked pipe will grow back. The footage after the clear tells you whether the line just needed cleaning or whether relining is the better spend.

Will jetting help a stormwater line after a Dark Creek storm?

It usually does. Silt and litter that storms push into your pipes flush out under jet pressure. If the street network itself is surcharged, no amount of jetting on your side will help, and that goes to Hunter Water first.

Do you use any chemicals when you jet a drain?

None. The work is done with water at pressure only, which is part of why the method suits older lines. No store-bought drain cleaner residue ends up in the yard or the creek catchment afterward.

Need a plumber? Call or send the form

Call (02) 4063 1093 or send the form below. Available 24/7, you see a fixed figure ahead of any work, and every job carries our 365-day warranty on all work.

Call (02) 4063 1093

Request a callback

Leave a name and number and a plumber will ring you back.